Jump to content
  • Philips S397: fingerprint scanner, LTE and advanced power saving


    DeZire

    Sometimes only one thing is required from a smartphone - it is good to perform everyday tasks. It is not megahertz and pixels that are important here, but a convenient shell, confident network reception and the ability to extend the battery charge for several days. Philips S397 meets these requirements: a simple and inexpensive device that has the necessary functions.

    Convenient to use

    Despite the low cost, the smartphone was equipped with a fingerprint sensor: it is located on the back cover, you don’t have to reach for it. The dark gray body resists fingerprints, they are practically invisible. The manufacturer did not give up the audio jack - a commendable decision. It is located on the top of the gadget, as well as a micro-USB port for charging, which is unusual.

    Philips S397: fingerprint scanner, LTE and advanced power saving

    Philips S397 received an IPS-display with a diagonal of 5.72 inches with an aspect ratio of 18: 9. The design is classic, there are no cutouts on the screen. Near the speaker is a front-facing camera of 8 megapixels, its capabilities are enough for video communication and selfie in good lighting conditions. The main camera is represented by a dual-module of 13 and 0.3 megapixels with support for bokeh effect.

    The smartphone works in LTE networks. You can use two SIM cards, which is convenient when you need to separate the work and home numbers, but there is no desire to carry two phones with you everywhere. Also, Philips S397 equipped with an FM-receiver, it will please fans of listening to the radio on the go.

    Philips S397: fingerprint scanner, LTE and advanced power saving

    Keeps track of Power

    The Philips S397 has a 3000 mAh battery. This is enough for a day of work without recharging. The device continuously played video in Full HD resolution at 50% screen brightness for eight hours. Autonomy can be improved by using advanced energy-saving settings.

    By default, the Philips S397 uses the “smart saving” mode, but other options are available in the settings. "Increased savings" disables unnecessary background activity and leaves access only to those programs that the user has selected. Thus, the smartphone can work for a long time without needing recharging: the manufacturer claims 520 hours in standby time and more than 22 hours in talk mode.

    Philips S397: fingerprint scanner, LTE and advanced power saving

    Enough speed

    The gadget is equipped with a quad-core Unisoc SC9863A processor with a frequency of 1.6 GHz. RAM 2 GB and the size of the internal memory is 16 GB, but it can be expanded - there is microSD support up to 64 GB. The device runs on the current operating system Android 9.0.

    Philips S397 filling refers to the initial level, but it is enough for everyday use. The OS is not overloaded with settings and heavy animation. In AnTuTu smartphone scored 71 598 points. The model allows you to pass the time on the road for simple games-timekillers, there is no problem with playing videos on YouTube.

    Summary

    Philips S397 is suitable for those who appreciate the simplicity and ability of smartphones to easily perform basic tasks. Calls, watching videos, chatting on social networks - it can do it all. Despite the moderate cost, the gadget was equipped with a fingerprint scanner and LTE support, and the built-in storage capacity can be expanded using a memory card. Another feature is the choice of energy-saving modes. You can find a balance between speed and autonomy without difficulty.

    When buying a smartphone in the official Philips online store, the buyer receives a Philips TAUN102BK wireless headset as a gift. The promotion is valid until September 30th.



    User Feedback

    Recommended Comments

    There are no comments to display.



    Guest
    Add a comment...

    ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.


  • Blogs

  • Categories

  • Gadgets


  • Reviews

    • OPPO Reno 3 review: Quad camera and lots of memory

      Last year's OPPO Reno 2 smartphone was remembered for its almost flagship characteristics. In the new generation, the emphasis has shifted - the role of the top-end device has been assigned to the Reno 3 Pro, and the standard “three” has become a mid-budget phone. However, Reno 3 received a powerful quad camera, high-quality screen, and a large amount of memory. We find out how good the new product is.

      Four rear modules and a 44-megapixel front-facing camera
      The main camera of Reno 3 received four modules, as in the top-end device of the series - Reno 3 Pro. However, there are some functions missing, such as interpolation up to 108 MP. All the blocks are arranged in a line on an islet that protrudes noticeably upwards if you wear the gadget without a cover.
      The main module has a 1/2-inch sensor with a resolution of 48 MP and a lens with an aperture of f/1.8. As usual, in standard mode, it produces 12-megapixel images, and if desired, you can take photos in full resolution - 48 MP. Telephoto is based on a 13-megapixel sensor and a lens with an f/2.4 aperture. The ultra-wide Angle is equipped with an 8-megapixel sensor and a lens with an f/2.2 aperture. Finally, the 2 MP sensor is designed to assess the depth of the scene.

      Telephoto, in addition to 2x optical zoom, provides a 5x hybrid zoom. The photo app allows you to quickly switch between four shooting modes: ultra-wide angle, 1x, 2x, and 5x.
      All modules can function together with HDR. This option works perfectly in Auto mode, improving both the light and dark tones of contrasting scenes. Artificial intelligence confidently recognizes the scenes being shot and selects settings.
      However, in non-standard lighting conditions, if you choose wide-angle optics, the color rendering will not always be accurate. This does not happen with the main module and the telephoto lens.

      The main module paired with the auxiliary module gives clear portraits and realistic blurs the background
      Reno 3 shoots well in mixed and artificial lighting, as well as in the absence of light in the dark. In the most problematic cases, the Night program helps out. It combines several shots and works out all the tones of contrasting scenes. For shooting with manual settings, an Expert preset is provided.
      Multi-megapixel selfies
      The front camera is built into the display and is located in the middle of its upper edge, in the "drop". The camera is equipped with a 44-megapixel sensor and a wide-angle f/2.4 aperture lens. The default settings are set to a 40-megapixel resolution of images. And the full one is selected by pressing a separate on-screen button. The image quality in both cases is approximately the same. Sharpness appears only from a distance of about 30 cm, that is, for example, it is impossible to obtain a macro photograph of your eye. It seems that the calculation was made for shooting with outstretched hands or a selfie stick. For self-portraits, there are traditionally many beauty options: smoothing the skin, correcting the shape of the face and nose, eye size, and so on.

      Selfies in 44MP mode
      The smartphone records 4K videos at 30 fps. The supported format is Full HD with 30 and 60 fps, as well as slow-motion clips in HD and Full HD. During movie shooting, you can freely switch the zoom.
      In 4K mode at 30 frames per second, the gadget produces a picture with the correct color reproduction and high definition. But when working with hands, stabilization is noticeably lacking.
      Shooting in Full HD at 60 fps uses Ultra Steady Video 2.0 stabilization, which makes the picture smoother.
      Work and entertainment without lags
      Reno 3 is built on an eight-core MediaTek Helio P90 chipset. The new product in AnTuTu gives out figures comparable to the results of Kirin 970 and Snapdragon 712, and slightly ahead of Snapdragon 710. And in the Geekbench 5 rating - is on par with Snapdragon 845. This speed is sufficient to avoid slowdowns in any applications.
      8 GB of RAM allows you to run multiple programs simultaneously. The built-in fingerprint sensor acts quickly and accurately. There are no performance problems in games. In the popular WoT: Blitz with default graphics settings, the frame rate is confidently kept at 60 fps.

      The device has only one main speaker, which produces clear sound without distortion up to about 90% of the volume. Plus, there is support for Dolby Atmos. In this software add-on, you can add surround sound and a bit of bass - a great option for multimedia applications.
      Unfortunately, you will not be able to create a full stereo pair, because the speaker is quieter than the main one. But in Reno3 Pro two speakers shake as if you are holding a good Bluetooth speaker in your hands. Complete in-ear headphones deliver high-quality sound. Thanks to the audio jack, you can connect your favorite accessory.

      The built-in storage is not too large: 128 GB. But it is easy to increase it by using a microSD memory card. It is placed in a triple slot next to two nano-SIM cards. We had a 512 GB test card at hand - it worked without problems.
      High autonomy
      The gadget is powered by a 4025 mAh battery and supports VOOC 3.0 fast charging technology. A 20 W adapter and a complete cable during the test provided recharging at high speed. For example, from 33 to 78%, the battery was charged in 13 minutes, and up to 100% in 27.
      An hour-long shootout in WoT: Blitz (display brightness - 50%) consumes 11 percent of the battery. That is, without going to the outlet, it is about 9 hours of offline gaming. In Flight-mode, with the same brightness, about 4.4% of the battery charge is spent per hour playing the video in Full HD. Therefore, you should expect 22 hours of offline video viewing. Excellent results!

      If long-term autonomy is not so important, you can disable power consumption optimization in the settings and select "High performance". In this case, the device will work a little faster, and the battery consumption will be stronger.
      Great screen
      Reno 3 is equipped with an AMOLED panel with a diagonal of 6.4 inches, a resolution of FHD+ (2400x1080 pixels), and an aspect ratio of 20:9. The display occupies 90.8% of the front panel area, has a teardrop-shaped cutout for the front and thin frames. The image is clear, with rich but natural colors. The viewing angles are large, and the brightness reserve is sufficient for using the phone on the street in any weather. With minimal screen light, it is comfortable to read in a dark room. And at night, you can switch to "Dark mode" - in fact, this is an inverse version of the design: with a black display and a white font. Many people will find it even more convenient, and it also saves battery life.
      Branded shell of the seventh version
      Reno 3 is running a proprietary ColorOS 7 shell based on Android 10. When comparing with the previous version, you can see that the font has not changed, but many icons have been redrawn. However, their shape and size can be easily changed at your own discretion. The screen can be converted to a split format - just make a three-finger swipe up.
      Specifications of OPPO Reno 3
      DISPLAY: 6.4 ", FHD + (2400x1080), 20: 9
      CHIPSET: CPU MediaTek Helio P90 (MT6779V), 2.2 GHz, GPU PowerVR GM 9446
      RAM: 8 GB
      STORAGE: 128 GB
      MAIN CAMERA: main - 48 megapixels (f/1.8) + 13 megapixels (telephoto) + 8 megapixels (wide-angle) + 2 megapixels (scene depth sensor);
      FRONT CAMERA: - 44 megapixels with f/2.4 aperture
      BATTERY: 4025 mAh
      FEATURES: a sub-screen fingerprint sensor, an NFC module, an audio output, support for microSD cards up to 256 GB (without SIM replacement), a proprietary shell ColorOS 7, three body colors: black, white and blue.
      Test results
      ANTUTU: 223,438
      GEEKBENCH: 5 428 single-core, 1568 multi-core
      AUTONOMY: about 22 hours of video playback

      Summary
      The OPPO Reno 3 is an interesting device with balanced characteristics. From the first minutes, the beautiful design, slim body, and high-quality 6.4-inch screen make you happy. Later on - high performance, fast recharging, and good battery life. The advantages include the photo-filling, including a 44-megapixel front camera. In addition, the built-in drive can be expanded with a memory card, but not to the detriment of the second SIM card - a trifle, but nice.

About Us

Worlds Tech News. CheapDeveloper provides the latest technology news, phone launch details, smartphone reviews, comparisons, laptops, cameras, Computer Hardware, Software, apps and more. You can trust our in-depth technology reviews to help you buy the best product for your needs.

×
×
  • Create New...