Jump to content
  • All specifications of HUAWEI Mate 30 revealed by massive leak


    DeZire

    Even before the announcement of the HUAWEI Mate 30 Pro, the appearance of the flagship was repeatedly confirmed by manufacturers of covers, but the full technical characteristics of the gadget remained unknown. The new leak completely revealed the specifications of the future product - at the same time, real photos of the device’s display appeared on the network.

    All specifications of HUAWEI Mate 30 revealed by massive leak

    An insider with the nickname RODENT950 published on Twitter a detailed list of smartphone specifications. If you believe the leak, the flagship will receive the latest Kirin 990 chipset with support for fifth-generation networks. Under the “hood” of the processor are eight cores: two Cortex-A76 clocked at 2.89 GHz, two Cortex-A76 (2.36 GHz) and four Cortex-A55, operating at a frequency of 1.95 GHz. For the SoC graphics capabilities, the Mali-G76 MP 16 video accelerator is responsible. Separately, the source notes the updated neural processor (NPU) based on the Da Vinci architecture.

    In the top-end configuration, the smartphone will receive 8 GB of RAM and 512 GB of internal memory. Additionally, the possibility of expanding the drive using proprietary memory cards is implemented.

    All specifications of HUAWEI Mate 30 revealed by massive leak

    According to available information, the Mate 30 Pro will receive a display with a diagonal of 6.6 'to 6.8' inches with a resolution of 2400x1746 pixels. Judging by the new picture that appeared on the Chinese social network Weibo, the new product will receive an impressive “fringe” for placing a 32-megapixel selfie camera, auxiliary sensors and a speaker.

    The main camera of the smartphone will be represented by three sensors: 40-megapixel Sony IMX600 (f/1.6), focal length 23 mm and optical stabilization, 40 megapixel sensor with wide-angle lens, focal length 18 mm and aperture f/1.55, as well as a sensor with resolution 8 megapixel (f/2.4), equipped with a telephoto lens with triple optical zoom. The ToF module for creating portrait shots with a realistic bokeh effect will also fit on the back of the case.

    Mate 30 Pro will receive a battery with a capacity of 4500 mAh and two charging technologies at once: fast wired (40 W), and 27-watt wireless. To unlock the device, Huawei Face ID 2.0 face recognition technology and a fingerprint scanner built into the display will be used.

    The presentation of the HUAWEI Mate 30 and Mate 30 Pro will take place on September 19.



    User Feedback

    Recommended Comments

    There are no comments to display.



    Guest
    Add a comment...

    ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By DeZire
      After almost two hours of presentation of the Mate 30 and Mate 30 Pro smartphones, the Watch GT 2 smartwatch and the Vision TV, HUAWEI made an important announcement - the new flagships will ship without Google services and applications. However, for them, there is already a replacement.

      Manufacturers of smartphones and other devices running Android can use Google services only after obtaining a license from the search giant. However, due to U.S. sanctions against HUAWEI, Google refused to certify the new Mate 30 and Mate 30 Pro smartphones. Therefore, the Chinese manufacturer cannot preinstall applications and services of the American corporation on them.
      Instead of Google Play on the new HUAWEI smartphones, the branded AppGallery application store will be available, and Google services will be replaced with their own counterparts. True, HUAWEI Mobile Services currently supports about 45 thousand applications. To fix this, a Chinese company invested a billion dollars in attracting developers and developing HMS.
      It is not yet clear what limitations future users of the new Mate 30 and Mate 30 Pro may face due to the lack of Google services.
    • By DeZire
      Along with the Mate 30 Pro model, HUAWEI introduced a “lightweight” version of the flagship smartphone called the Mate 30. The more affordable new product received the same Kirin 990 processor - the main differences between the devices lie in the camera module and some design features.
      Unlike the older model, the Mate 30 received a “flat” 6.62-inch OLED display with side frames. The screen resolution with a small “fringe” for the front camera and an integrated fingerprint scanner is 2340x1080 pixels. The glass case of the device is protected from water and dust according to the IP53 standard. One of the features of the gadget was the support of the contactless control function.

      The smartphone is built on the basis of the flagship 7-nm mobile platform Kirin 990 with a maximum clock frequency of 2.86 GHz, a neural computing module (NPU) and a Mali-G76 graphics accelerator. The amount of RAM is 8 GB, the internal drive - 128 GB. Another difference from the Pro modification was the modem - the smartphone supports 4G networks, despite the support of the fifth-generation networks by the platform itself.

      The main camera module of the device is represented by three sensors. The main, 40-megapixel with wide-angle optics, equivalent focal length (EGF) of 27 mm and aperture of f/1.8, is supplemented by an auxiliary 8 megapixel (f/2.4) with a telephoto lens, EGF of 17 mm and optical stabilization. Macro shooting from a distance of 2.5 cm and night mode are supported.

      The gadget's camera with an ISO 204 800 photosensitivity supports three-time optical, five-time hybrid, and 30x digital zoom. The combination is completed by a 16-megapixel sensor with an ultra-wide-angle lens (f/2.2) and a laser autofocus sensor. The resolution of the sensors of the dual front camera is 24 megapixels (f/2.0).

      The battery capacity of the model is 4200 mAh, supports fast wired (40 W) and fast wireless (27 W) charging. Like the Pro version, the Mate 30 runs Android 10 with the proprietary EMUI 10 add-in and the built-in App Gallery app store.

      Specifications of HUAWEI Mate 30:
      Display: OLED, 6.62 ", 2340x1080, 19.5: 9 Chipset: Kirin 990, Mali G76 GPU RAM: 6/8 GB Built-in memory: 128 GB Main camera: 40 megapixels (f/1.8) + 8 megapixels (f/2.4, telephoto lens) + 16 megapixels (f/2.2) Front camera: 24 MP (f/2.0) Battery: 4200 mAh, fast charge (40 W), wireless charge (27 W) Security: fingerprint scanner in display Communication: 4G VoLTE, Wi-Fi 802.11ac, Bluetooth 5.0, GPS, GLONASS, NFC Weight: 196 grams The Huawei Mate 30 in six different body colors will go on sale at a price of € 799.
    • By DeZire
      The first official image of the upcoming flagship smartphone Huawei has appeared in the Chinese social network Weibo. The poster confirmed some rumors about the Mate 30. So, the device will receive a new design and will be different from all previous devices of the company.

      As previously expected, Mate 30 will receive a round module of the main camera with four sensors. The led flash will be placed on the side. As in all previous Huawei flagships, the camera will be developed jointly with Leica specialists.
      Of the interesting features of the appearance of Mate 30 can be distinguished flat top face, as in Huawei P30, and a small "cutouts" on the screen. The latter reportedly houses sensors for 3D face scanning and secure user identification.

      In addition to the official teaser in the network, there was a real photo of Huawei Mate 30. The smartphone is hidden in a protective case, but it does not prevent to consider the curved edges of the screen and the cutout on top.
      Huawei has already scheduled an event for September 6, where the new flagship processor Kirin 990 will be presented. The presentation of Mate 30 with this chipset is expected in October this year.
    • By DeZire
      In this release of Insider information: Huawei Mate 30: announcement date and new details about the filling; OnePlus 7T Pro is preparing for the autumn release; Google Pixel 4 showed on the "live" photo.
      Huawei Mate 30: announcement date and new details about the filling
      There were a lot of rumors about Huawei Mate 30 series smartphones, the exact release date of the models remained unknown. According to the website iGeekPhone, this year's news will be presented on September 19.

      According to rumors, smartphones will be built on the basis of 7-nm processor Kirin 990 with built-in 5G-modem. Mate 30 Pro will receive a 6.7-inch AMOLED display manufactured by BOE. The device will be equipped with a Quad camera with two 40-megapixel modules and super-fast charging capacity of 55 watts. It is possible that Mate 30 out of the box will get the Android operating system without pre-installed Google Play services.
      Huawei has not commented on the leak.
      OnePlus 7T Pro prepares for the fall release
      Since 2016, smartphones with the addition of the "suffix" T to the model number have been regularly produced under The OnePlus brand. The current line of vendor gadgets will not be an exception. According to the PhoneArena website, the OnePlus 7T Pro will debut on October 15.

      According to early leaks, the new flagship will receive a 6.7-inch AMOLED display with a 90hz refresh rate, a Snapdragon 855 Plus processor, 6GB of RAM and at least 128GB of ROM. Selfie-module with a retractable mechanism will be placed in the body, the main camera will receive three sensors, the characteristics of which are still unknown.
      Probably OnePlus 7T Pro will run Android 10 Q with the proprietary Oxygen OS shell. The battery capacity is expected to be at least 4000 mAh.
      Google Pixel 4 showed on the "live" photo
      Internet resource AndroidPure published a picture, which supposedly shows a smartphone Google Pixel 4. It is alleged that the photo was taken on the plane, and the gadget was the hand of a Google employee. It is noteworthy that in contrast to the previous leaks on the smartphone is not visible "chin".

      It's hard to tell which leak is actually correct. Google may have dozens of prototypes, most of which will never reach consumers.
      A few weeks earlier, Google released a pixel 4 renderer with sensors on the front panel, which confirms the presence of the Soli micro-radar in the new model for remote gesture recognition. To identify the user by face, there are 2 front infrared modules, a selfie camera and a pair of auxiliary sensors.

      Judging by the photo, the front camera and speaker are located in the same place where they were located on the official render. The presentation of Pixel 4 and Pixel 4 XL is expected in October this year.
    • By DeZire
      In this release of Insider information: Huawei Mate 30 and Mate 30 Pro will be equipped with an unusual photo module; Lenovo K11 with a triple camera will cost less than $200; Nubia Z20 will add to the line of these frameless smartphones; pocket photo printer and new wireless Xiaomi headphones have been registered in Bluetooth SIG.
      Huawei Mate 30 and Mate 30 Pro will be equipped with an unusual photo module
      New Huawei Mate flagships are waiting for us in the second half of this year and we expect that the company will traditionally surprise us with technical solutions. For example, insiders from China are talking about abandoning the trend now periscope camera design in favor of a double main rear camera. Two custom sensors Sony IMX6xx with a resolution of 40+ MP and a matrix of 1/1,7 and 1/1,5 inches will be used for this purpose. In total, there will be four cameras on the rear panel.

      According to rumors, the Mate 30 Pro is built on the newest 990 chipset Kirin with the support of the 5G modem. The basic modification will receive 8 GB of RAM and 128 GB of main memory, battery 4300 mAh and Android 10 with a proprietary EMUI shell. A day ago, smartphones were seen in the Chinese subway. The official announcement will take place in mid-October.
      Lenovo K11 with a triple camera will cost less than $200
      Google added a description of the Lenovo K11 smartphone on the Android Enterprise portal, noting that it will be available soon. The entry-level device has a triple camera with a resolution of 12 megapixels, LED flash, fingerprint scanner on the rear panel. The smartphone will be presented in a single version with 4 GB of RAM and 32 GB of internal memory, Android Pie will be available from the box. In front of the center of the upper edge, there is a front-facing with unknown parameters. The frames around the screen are minimal, except for the lower protrusion “chin”

      According to the retailer in the UAE, Lenovo K11 will run on a budget chip MediaTek Helio P22, for autonomy is responsible battery 3300 mAh. The approximate cost of the Lenovo K11 is $163.
      Nubia Z20 will join the line of real frameless smartphones
      A subsidiary of the Chinese company ZTE, Nubia brand will present the new flagship smartphone Z20 on August 8. The manufacturer is in no hurry to disclose the characteristics of the device before the announcement, but a few live images still got into the network and added a reason for discussion.

      Although the entire front panel is made in black, as well as the Wallpaper on the lock screen, an attentive viewer may note the absence of any hint of a physical cutout in the display for the front camera. The Nubia Z20 screen is slightly curved at the edges, creating the effect of an endless display. More and more smartphones are equipped with a retractable mechanism for the front in favor of a completely frameless screen and the Z20 supports this trend.

      Little is known about the characteristics of the smartphone: according to rumors, Nubia Z20 will receive a Snapdragon 855 processor. Earlier, the head of the brand Ni FEI said that the device will be able to shoot people, the moon, landscapes and any other objects equally well, including with the help of a front camera.
      Xiaomi pocket photo printer has been registered in Bluetooth SIG
      Xiaomi used to surprise users with new categories of a wide variety of gadgets. For example, soon a pocket photo printer may appear on the market: this is hinted by the certification certificate obtained in Bluetooth SIG. It is called Pocket Photo Printer — at the time of release, the trade name can be changed to a more concise. Together with the printer, wireless headphones Mi True Wireless Earphones 2 were registered.

      Pocket Photo Printer will allow owners of mobile devices to instantly print the photo they just took on a small format media. The photo printer will replace the XPRINT Pocket AR Photo Printer, which was introduced in February 2018. The certificate refers to the support of wireless standard Bluetooth 5.0. The printer uses Zink technology — printing without ink or toner, but using pre-prepared paper.

      The Mi True Wireless Earphones 2 (TWSEJ02JY) will be the successor to the Mi Bluetooth Earphones Air (TWSEJ01JY), released in January. They also support Bluetooth 5.0, which means they have better connectivity, range and battery life.
      Release date and cost of future new products are not disclosed.
  • Blogs

  • Categories

  • Gadgets


  • Reviews

    • OPPO Reno 3 review: Quad camera and lots of memory

      Last year's OPPO Reno 2 smartphone was remembered for its almost flagship characteristics. In the new generation, the emphasis has shifted - the role of the top-end device has been assigned to the Reno 3 Pro, and the standard “three” has become a mid-budget phone. However, Reno 3 received a powerful quad camera, high-quality screen, and a large amount of memory. We find out how good the new product is.

      Four rear modules and a 44-megapixel front-facing camera
      The main camera of Reno 3 received four modules, as in the top-end device of the series - Reno 3 Pro. However, there are some functions missing, such as interpolation up to 108 MP. All the blocks are arranged in a line on an islet that protrudes noticeably upwards if you wear the gadget without a cover.
      The main module has a 1/2-inch sensor with a resolution of 48 MP and a lens with an aperture of f/1.8. As usual, in standard mode, it produces 12-megapixel images, and if desired, you can take photos in full resolution - 48 MP. Telephoto is based on a 13-megapixel sensor and a lens with an f/2.4 aperture. The ultra-wide Angle is equipped with an 8-megapixel sensor and a lens with an f/2.2 aperture. Finally, the 2 MP sensor is designed to assess the depth of the scene.

      Telephoto, in addition to 2x optical zoom, provides a 5x hybrid zoom. The photo app allows you to quickly switch between four shooting modes: ultra-wide angle, 1x, 2x, and 5x.
      All modules can function together with HDR. This option works perfectly in Auto mode, improving both the light and dark tones of contrasting scenes. Artificial intelligence confidently recognizes the scenes being shot and selects settings.
      However, in non-standard lighting conditions, if you choose wide-angle optics, the color rendering will not always be accurate. This does not happen with the main module and the telephoto lens.

      The main module paired with the auxiliary module gives clear portraits and realistic blurs the background
      Reno 3 shoots well in mixed and artificial lighting, as well as in the absence of light in the dark. In the most problematic cases, the Night program helps out. It combines several shots and works out all the tones of contrasting scenes. For shooting with manual settings, an Expert preset is provided.
      Multi-megapixel selfies
      The front camera is built into the display and is located in the middle of its upper edge, in the "drop". The camera is equipped with a 44-megapixel sensor and a wide-angle f/2.4 aperture lens. The default settings are set to a 40-megapixel resolution of images. And the full one is selected by pressing a separate on-screen button. The image quality in both cases is approximately the same. Sharpness appears only from a distance of about 30 cm, that is, for example, it is impossible to obtain a macro photograph of your eye. It seems that the calculation was made for shooting with outstretched hands or a selfie stick. For self-portraits, there are traditionally many beauty options: smoothing the skin, correcting the shape of the face and nose, eye size, and so on.

      Selfies in 44MP mode
      The smartphone records 4K videos at 30 fps. The supported format is Full HD with 30 and 60 fps, as well as slow-motion clips in HD and Full HD. During movie shooting, you can freely switch the zoom.
      In 4K mode at 30 frames per second, the gadget produces a picture with the correct color reproduction and high definition. But when working with hands, stabilization is noticeably lacking.
      Shooting in Full HD at 60 fps uses Ultra Steady Video 2.0 stabilization, which makes the picture smoother.
      Work and entertainment without lags
      Reno 3 is built on an eight-core MediaTek Helio P90 chipset. The new product in AnTuTu gives out figures comparable to the results of Kirin 970 and Snapdragon 712, and slightly ahead of Snapdragon 710. And in the Geekbench 5 rating - is on par with Snapdragon 845. This speed is sufficient to avoid slowdowns in any applications.
      8 GB of RAM allows you to run multiple programs simultaneously. The built-in fingerprint sensor acts quickly and accurately. There are no performance problems in games. In the popular WoT: Blitz with default graphics settings, the frame rate is confidently kept at 60 fps.

      The device has only one main speaker, which produces clear sound without distortion up to about 90% of the volume. Plus, there is support for Dolby Atmos. In this software add-on, you can add surround sound and a bit of bass - a great option for multimedia applications.
      Unfortunately, you will not be able to create a full stereo pair, because the speaker is quieter than the main one. But in Reno3 Pro two speakers shake as if you are holding a good Bluetooth speaker in your hands. Complete in-ear headphones deliver high-quality sound. Thanks to the audio jack, you can connect your favorite accessory.

      The built-in storage is not too large: 128 GB. But it is easy to increase it by using a microSD memory card. It is placed in a triple slot next to two nano-SIM cards. We had a 512 GB test card at hand - it worked without problems.
      High autonomy
      The gadget is powered by a 4025 mAh battery and supports VOOC 3.0 fast charging technology. A 20 W adapter and a complete cable during the test provided recharging at high speed. For example, from 33 to 78%, the battery was charged in 13 minutes, and up to 100% in 27.
      An hour-long shootout in WoT: Blitz (display brightness - 50%) consumes 11 percent of the battery. That is, without going to the outlet, it is about 9 hours of offline gaming. In Flight-mode, with the same brightness, about 4.4% of the battery charge is spent per hour playing the video in Full HD. Therefore, you should expect 22 hours of offline video viewing. Excellent results!

      If long-term autonomy is not so important, you can disable power consumption optimization in the settings and select "High performance". In this case, the device will work a little faster, and the battery consumption will be stronger.
      Great screen
      Reno 3 is equipped with an AMOLED panel with a diagonal of 6.4 inches, a resolution of FHD+ (2400x1080 pixels), and an aspect ratio of 20:9. The display occupies 90.8% of the front panel area, has a teardrop-shaped cutout for the front and thin frames. The image is clear, with rich but natural colors. The viewing angles are large, and the brightness reserve is sufficient for using the phone on the street in any weather. With minimal screen light, it is comfortable to read in a dark room. And at night, you can switch to "Dark mode" - in fact, this is an inverse version of the design: with a black display and a white font. Many people will find it even more convenient, and it also saves battery life.
      Branded shell of the seventh version
      Reno 3 is running a proprietary ColorOS 7 shell based on Android 10. When comparing with the previous version, you can see that the font has not changed, but many icons have been redrawn. However, their shape and size can be easily changed at your own discretion. The screen can be converted to a split format - just make a three-finger swipe up.
      Specifications of OPPO Reno 3
      DISPLAY: 6.4 ", FHD + (2400x1080), 20: 9
      CHIPSET: CPU MediaTek Helio P90 (MT6779V), 2.2 GHz, GPU PowerVR GM 9446
      RAM: 8 GB
      STORAGE: 128 GB
      MAIN CAMERA: main - 48 megapixels (f/1.8) + 13 megapixels (telephoto) + 8 megapixels (wide-angle) + 2 megapixels (scene depth sensor);
      FRONT CAMERA: - 44 megapixels with f/2.4 aperture
      BATTERY: 4025 mAh
      FEATURES: a sub-screen fingerprint sensor, an NFC module, an audio output, support for microSD cards up to 256 GB (without SIM replacement), a proprietary shell ColorOS 7, three body colors: black, white and blue.
      Test results
      ANTUTU: 223,438
      GEEKBENCH: 5 428 single-core, 1568 multi-core
      AUTONOMY: about 22 hours of video playback

      Summary
      The OPPO Reno 3 is an interesting device with balanced characteristics. From the first minutes, the beautiful design, slim body, and high-quality 6.4-inch screen make you happy. Later on - high performance, fast recharging, and good battery life. The advantages include the photo-filling, including a 44-megapixel front camera. In addition, the built-in drive can be expanded with a memory card, but not to the detriment of the second SIM card - a trifle, but nice.

About Us

Worlds Tech News. CheapDeveloper provides the latest technology news, phone launch details, smartphone reviews, comparisons, laptops, cameras, Computer Hardware, Software, apps and more. You can trust our in-depth technology reviews to help you buy the best product for your needs.

×
×
  • Create New...